Auteur'S Blog Over Financiële En Zakelijke

Foundation Design


Stichtingontwerp is het maken van een bouwplan voor een bouwfundament. Het is een zeer gespecialiseerde functie en wordt meestal uitgevoerd door een bouwkundig ingenieur. De basis is de structurele basis die op de grond staat en de rest van het gebouw ondersteunt. Daarom moet het funderingsontwerp een uitgebreide studie van de grond onder de fundering omvatten, evenals het ontwerp en de materialen die op de fundering zelf worden gebruikt.

Foundation Depth

Er zijn veel soorten bouwfundaties. Met uitzondering van plaatfunderingen die op de grond worden gelegd, kunnen de meeste funderingen op verschillende diepten worden geïnstalleerd. De vereiste diepte van een fundering kan van verschillende factoren afhankelijk zijn:

  • Grond draagvermogen. Dit bepaalt hoeveel belasting (gewicht of kracht) de bestaande grond kan weerstaan.
  • Grondsoort. Verschillende soorten grond hebben verschillende eigenschappen die hun geschiktheid voor het ondersteunen van een fundering kunnen beïnvloeden.
  • Vorstdiepte. De diepte waarop de grond in de koudste tijd van het jaar bevriest, bekend als de vorstdiepte of vorstlijn, wordt vaak gebruikt om de minimale diepte voor vele soorten funderingen te bepalen.
  • Grondwatertabel. Een hoge grondwaterspiegel kan de funderingsdiepte en het type fundering dat kan worden gebruikt, beperken. Grondwaterhoogte is meestal opgenomen in een bodemstudie.

  • Minimale diepte. Afgezien van andere factoren, is de minimale diepte van een fundering meestal niet minder dan 18 inch om verwijdering van de bovengrond en variaties in het maaiveld mogelijk te maken.

Foundation Materials

Funderingen worden meestal gebouwd met metselwerk, zoals betonblokken of bakstenen, of met gestort beton. Metselwerkmaterialen bieden een hoge druksterkte en zijn veel beter bestand tegen beschadiging door vocht en grond dan hout en metalen materialen. Een metselwerkfundering strekt zich typisch uit boven de grond om andere bouwmaterialen te beschermen tegen vocht en andere schadelijke effecten van contact met de grond. Metselwerkfunderingen worden meestal intern versterkt met metalen wapening of andere materialen.

Sommige bouwfunderingen zijn gebouwd met behandelde houten palen of pieren. In dit geval worden de funderingsdragers diep in de aarde gedreven en / of rusten ze op rotsblokken of betonnen blokken. Palen en pieren worden vaak gebruikt bij het bouwen op of in de buurt van water of waar het land gevoelig is voor overstroming.

Een van de belangrijkste funderingsmaterialen is de basis, of basislaag, van anorganisch materiaal dat direct onder de fundering wordt gelegd. In het algemeen hebben ondergedompelde grond en klei een beperkt draagvermogen en kunnen ze de belastingen die door een gebouw worden opgelegd niet aan. Daarom worden gronden weggegraven en vervangen door een droog en uniform dicht materiaal, zoals grind of steenslag, dat maximale schuifweerstand en draagvermogen biedt. Basismaterialen bevorderen ook de afvoer van ondergronds water en breiden niet uit met hoge niveaus van vocht, zoals grond.

Stichting Load Transfer

Funderingen moeten zodanig zijn ontworpen dat belastingen die door het gebouw worden opgelegd gelijkmatig worden overgebracht op het contactoppervlak om de som van de dode last, de belading en de windbelasting naar de grond over te brengen. Het netto laadvermogen dat in de bodem komt, mag het draagvermogen van de grond niet overschrijden. Bij het ontwerp van de constructie moet ook rekening worden gehouden met de verwachte bezinking van het gebouw om ervoor te zorgen dat alle bewegingen worden gecontroleerd en uniform zijn om schade aan de constructie te voorkomen. Bovendien moet het algemene ontwerp van de fundering, de bovenbouw en de kenmerken van de grond worden bestudeerd om potentieel gunstige bouwstrategieën te identificeren.

Foundation Design

FAQ - 💬

❓ What are the steps to design foundation?

👉 Design Procedures for a Building Foundation (Step by Step)

  1. Decide the Location of Columns & Foundation and Type of Loads Acting on Them. ...
  2. Estimate Allowable Bearing Pressure of Soil Using Ground Investigation Report. ...
  3. Decide Depth of Foundation. ...
  4. Calculate Foundation Area. ...
  5. Determine Variation in Vertical Stresses.

❓ What are the 7 types of foundation?

👉 7 different types of foundations and how to pick the best one for...

  • 1) Liquid foundation. ...
  • 2) Serum foundation. ...
  • 3) Tinted oil foundation. ...
  • 4) Cream foundation. ...
  • 5) Whipped mousse foundation. ...
  • 6) Stick foundation. ...
  • 7) Powder foundation. ...
  • Also read:

❓ How do you design foundation depth?

👉 General factors to be considered for determining depth of foundation are:

  1. Load applied from structure to the foundation.
  2. Bearing capacity of soil.
  3. Depth of water level below the ground surface.
  4. Types of soil and depth of layers in case of layered soil.
  5. Depth of adjacent foundation.

❓ What are the principles of foundation design?

👉 Foundation Design Principles

  • Soil conditions.
  • Type of structure.
  • Structural loading(s).
  • Economic factors.
  • Time factors relative to the proposed contract period.
  • Construction problems.

❓ What is minimum depth of foundation?

👉 Detailed Solution. As per Cl. 7.2, IS:1904, All foundations shall extend to a depth of at least 50 cm below the natural ground level.

❓ What is the normal depth of a foundation?

👉 A depth of 900 mm to 1000 m is regarded as a minimum at which some seasonal movement will occur but is unlikely to be of a magnitude sufficient to cause damage to the superstructure or ordinary building finishes.

❓ Which foundation type is best?

👉 The Very Best Foundations for Your Skin

  • Maybelline Fit Me Matte + Poreless Liquid Foundation. ...
  • Giorgio Armani Beauty Luminous Silk Foundation. ...
  • Fenty Beauty by Rihanna Pro Filt'r Soft Matte Longwear Foundation. ...
  • Shiseido Synchro Skin Self-Refreshing Foundation SPF 30. ...
  • Estée Lauder Double Wear Stay-in-Place Makeup.

❓ What are the 3 types of foundations?

👉 Foundation types vary, but likely your house or home's addition does or will have one of these three foundations: full or daylight basement, crawlspace, or concrete slab-on-grade.

❓ How do I calculate my foundation?

👉 Measure the length and width that you'd like to cover. Multiply the length by the width to determine square footage. Convert the thickness from inches to feet. Multiply the thickness in feet by the square footage to determine cubic feet.

❓ WHAT IS foundation and it types?

👉 Foundation is a critical stage of building construction. The two major types of foundations are shallow foundations and deep foundations. Just as the models sound, they are measured by their depth in the soil and the load they can carry. You don't have to be an engineer to read this piece.

❓ What is the standard footing size?

👉 Under every house is a foundation, and under most foundations are footings. Most of the time we take footings for granted, and usually we can: For typical soils, a common 16- or 20-inch-wide footing can more than handle the relatively light weight of an ordinary house.

❓ What is foundational foundation design?

👉 Foundation is the base of any structure. Without a solid foundation, the structure would not hold for long. We have to be very cautious with the design of foundations because our entire structure rests on the foundation. The job of a foundation is to transfer the loads of the building safely to the ground.

❓ What factors affect the design of a foundation?

👉 As we discussed in the earlier article, design of foundation depends on the type of soil, type of structure and its load. Higher the load bearing capacity of the soil, the larger the load it could safely carry.

❓ What is the purpose of building foundation?

👉 The job of a foundation is to transfer the loads of the building safely to the ground. The strength of the foundation determines the life of the structure. As we discussed in the earlier article, design of foundation depends on the type of soil, type of structure and its load.

❓ What is the depth and width of the foundation?

👉 The depth and width of foundation should be according to structural design. The depth of the foundation should not be less than 1 meter in case the design is not available. The length, width and depth of excavation should be checked with the help of center line and level marked on the marking pillars.


Video Van De Auteur: Design of column footing

Gerelateerde Artikelen:

✔ - Pioneering Technology Corp. - Cook Safe & Win Giveaway (verlopen)

✔ - Hoe Back-up inhouding op formulier 945 te melden

✔ - Donor Disclosures for Charities


Nuttig? Deel Dit Met Je Vrienden!