Auteur'S Blog Over Financiële En Zakelijke

Ground Fault Circuit Interrupter (GFCI)


Een aardlekschakelaar is een elektrisch apparaat dat is geïnstalleerd om te beschermen tegen ernstige elektrische schokken. GFCI's kunnen ook de elektrocutie verminderen en elektrische brandwonden en schokletsel minimaliseren. Een GFCI, niet te verwarren met een AFCI, integreert een aardlekbeveiliging in recipiënten waarin elektrische apparatuur in de buurt van water is of in contact kan komen met water.

Aardlekschakelaars detecteren ook aardfouten en onderbreken de stroom van elektrische stroom. Een GFCI is niet en mag niet worden gebruikt om een ​​zekering te vervangen en biedt GEEN bescherming tegen overbelasting van circuits, kortsluiting of schokken.

Hoe een GFCI werkt

Een normale 120-volt stopcontact heeft twee verticale sleuven en een rond gat net eronder of aan de zijkanten. Meestal is de linker gleuf groter dan de rechter en komt deze overeen met de neutrale terwijl de rechter gleuf heet wordt genoemd. Het ronde gat is de 'grond'. Wanneer het stopcontact naar behoren werkt, stroomt de elektriciteit van heet naar neutraal, en dat is wanneer de GFCI in actie komt.

De GFCI meet de hoeveelheid stroom die van heet naar neutraal vloeit, zodat het circuit kan trippen en wordt uitgeschakeld. Bij juiste installatie kan een GFCI variaties van slechts 4 milliampère detecteren en deze schakelt snel uit, minder dan een seconde, waardoor de stroom wordt afgeschakeld.

Waar een GFCI installeren

Een GFCI is vereist door de National Electrical Code en is vereist in:

  • Onderwater zwembadverlichting
  • Buiten en dit omvat fonteinen
  • Roltrappen en liften
  • Badkamerhouders inclusief bubbelbaden
  • garages
  • Keuken (boven het aanrecht), hoewel niet nodig op koelkasten in de keuken
  • Crawlruimten en onafgemaakte kelders
  • Wet Bar en Utility Sinks
  • Wasserijen
  • Gezondheidszorgfaciliteiten
  • Wanneer nodig voor beurzen en buitenactiviteiten

Draagbare GFCI-bescherming kan ook nodig zijn wanneer elektrische apparatuur wordt gebruikt in tuingerelateerde werken en bij het gebruik van elektrisch gereedschap in en rond het huis.

Drie soorten GFCI's

GFCI's zijn op drie verschillende manieren te vinden. De meest gebruikelijke is de GFCE-houder, die erg lijkt op een gewone wandhouder, erg goedkoop en gemakkelijk te installeren. De draagbare GFCI kan worden aangesloten op een standaard stopcontact dat de nodige bescherming biedt, terwijl het tijdelijke exemplaar een aansluitplug is die kan worden gebruikt om de gewenste bescherming te bieden, maar niet de vereisten van een permanente bescherming vervangt. Bij gebruik buitenshuis moet de draagbare en tijdelijke waterbestendig zijn en zijn aangegeven voor gebruik buitenshuis door de fabrikant.

Soms moet u een nieuwe GFCI installeren waarop een oude onbeveiligde houder is geïnstalleerd. Deze houders kunnen worden vervangen door een van de volgende:

  • Een ander recipiënt van het niet-aardingstype.
  • Een GFCI-ontvanger, indien gemarkeerd als "Geen apparatuurgrond."
  • Een geaard stopcontact, als de GFCI is beveiligd en gemarkeerd als "GFCI beschermd" en "Geen apparatuuraard".

Wat te doen als de GFCI-reizen

In sommige gevallen zullen GFCI's trippen, maar dat betekent niet dat er iets mis is met de installatie. Als de GFCI is geïnstalleerd in circuits langer dan 100 voet, kan dit een van de redenen zijn waarom uw onderbreker aan het trippen is. Een ander probleem kan optreden wanneer het circuit veel splitsingen, TL-verlichtingsarmaturen of permanent geïnstalleerde elektromotoren heeft, omdat dit ertoe kan leiden dat de GFCI uitschakelt.

Voordat u een aardlekschakelaar installeert, kan het stroomverlies worden overwogen bij gebruik van de beveiliging met vriezers, garagedeurbedieningen en andere. Houd er rekening mee dat tijdens de installatie de lijnen en / of belastingen op de juiste manier zijn geplaatst om te zorgen dat het apparaat correct werkt. Als dit niet het geval is, wordt de GFCI niet opnieuw ingesteld, dus zorg ervoor dat de verbindingen juist zijn.

De GFCI is niet hetzelfde als de ACFI. De AFCI wordt gebruikt om brandgevaren aan te pakken, terwijl GFCI is geïnstalleerd om schokken te voorkomen. We verwachten binnenkort een combinatie van apparaten met zowel AFCI- als GFCI-beveiliging in één stuk.

Ground Fault Circuit Interrupter (GFCI)

FAQ - 💬

❓ Is there a difference between GFI and GFCI?

👉 Ground fault circuit interrupters (GFCI) and ground fault interrupters (GFI) are the exact same device under slightly different names. Though GFCI is more commonly used than GFI, the terms are interchangeable.

❓ Where ground fault circuit interrupter GFCI should be used?

👉 A GFCI should be used in any indoor or outdoor area where water may come into contact with electrical products. The National Electrical Code currently requires that GFCIs be used in all kitchens, bathrooms, garages, and outdoors.

❓ What are the 3 types of GFCI?

👉 Three types of GFCIs are commonly used in homes – the GFCI outlet, the GFI circuit breaker and the portable GFCI.

❓ What type of device is GFCI?

👉 An electrical outlet used in a wet area must be protected by a Ground Fault Circuit Interrupter (GFCI) device to prevent electrical shock. The GFCI ensures that the worst shock from being exposed to electricity is at most a 5 milliampere (mA) of current.

❓ Do all GFCI outlets have a reset button?

👉 All GFCI outlets have a reset button (typically red) in the upper center of the outlet. Find the GFCI outlet near the outlet that tripped. You will be able to tell the problem outlet because the red reset button will have popped out.

❓ What causes a GFCI breaker to trip?

👉 If the GFCI's internal current transformer senses more than a 4-5 milliamp loss, it instantly shuts down the outlet and any outlets it feeds to prevent accidental electrocution. Most often, when a GFCI “trips” it is the result of a faulty appliance plugged into the outlet or an outlet down circuit.

❓ What are the 3 places in the house that must have GFCI?

👉 The NEC requires GFCIs on all exterior and bathroom receptacles (another term for outlets). GFCIs are also required on all receptacles serving kitchen countertops. In laundry rooms and utility rooms, GFCIs should be installed on outlets within six feet of sinks, washing machines, and water heaters.

❓ Do all bathroom outlets need to be GFCI?

👉 GFCI receptacles are required in bathrooms, garages, crawl spaces, basements, laundry rooms and areas where a water source is present.

❓ What is the purpose of a GFCI?

👉 A ground fault circuit interrupter, called a GFCI or GFI, is an inexpensive electrical device that can either be installed in your electrical system or built into a power cord to protect you from severe electrical shocks.

❓ Why is a GFCI important?

👉 Ground-fault circuit interrupters (GFCIs) are used for protection from an electrical ground fault. They will also protect against fires and overheating. A GFCI is a fast-acting circuit breaker designed to turn off electric power in the event of a ground fault.

❓ What happens when a GFCI won't reset?

👉 If you test and reset your GFCI outlet, but it still won't stay reset, a good idea is to check the breaker box to make sure the circuit breaker hasn't tripped. Try resetting the outlet. Once you reset the outlet and it still doesn't reset, moisture buildup in the wiring or outlet may be the culprit.

❓ How do ground fault circuit interrupters prevent electrocution?

👉 Ground Fault Circuit Interrupters (GFCIs): A ground fault circuit interrupter (GFCI) can help prevent electrocution. If a person’s body starts to receive a shock, the GFCI senses this and cuts off the power before he/she can get injured. GFCIs are generally installed where electrical circuits may accidentally come into contact with water.

❓ When does a GFCI interrupter trip on the ground?

👉 Ground fault circuit interrupters must sense and operate when the ground current exceeds 6 milliamperes. UL Standard No. 943 covers ground fault circuit interrupters. Class “A” GFCI devices are the most common. Trip when current to ground is 6 milliamperes (6/1000 of an ampere) or greater.

❓ What is a GFCI and how does it work?

👉 These special electrical devices (GFCI’s) shut the power off to a circuit when as little as .005 amp is leaking. Under normal circumstances, the current flowing through a circuit is the same at any point.

❓ Can a GFCI prevent electrocution?

👉 Prevention from Shock Hazards. What is a GFCI. A ground fault circuit interrupter (GFCI) can help prevent electrocution. If a person’s body starts to receive a shock, the GFCI senses this and cuts off the power before he/she can get injured.


Video Van De Auteur: What's a Ground Fault Circuit Interrupter / GFCI?

Gerelateerde Artikelen:

✔ - 5 Kritieke fouten bij het plannen van evenementen die u moet weten

✔ - Hoe u coupons van fabrikanten kunt krijgen

✔ - Adam Osborne Biography: Entrepreneurs


Nuttig? Deel Dit Met Je Vrienden!